FERROCARE MACHINES PVT LTD
Regd Office: 32/3/8, Yewalewadi
road,Kondhwa, Pune 411048, India
Contact : +91 96079 74281
Email: info@ferrocare.comE
FERROCARE INTERNATIONAL
Regd Office: 32/3/8, Yewalewadi road,Kondhwa, Pune 411048, India
Contact : +91 96079 74281
Email: info@ferrocare.com
E
Low Vacuum Dehydration & Degassification
Even 500ppm of moisture in oil leads to catostrophic failures in hydraulic systems
AUTOMATIC OPERATION
1. The challenge is to remove moisture without heating to ensure the quality does not deteriorate
2. Or degrades when heated beyond 50°C
3. The biggest enemy of hydraulic food is moisture
The LVDH is the only system, which can remove, cracked oil, thus restoring oil to its original properties.
The LVDH unit removes water/moisture to below 50% of the saturation point in oil at low temperature. (44-600C) and finds application in: · Hydraulic oils · Turbine oils . Compressor oils · Vacuum pump and compressor seal oils · Gear oils · Dehydration before blending different oils.
With a range of models tailored to suit various needs, including the LVDH 600, 900, 2100, 3000, and 6000, we offer versatility and efficacy in oil restoration. Whether you're managing a small-scale operation or a large industrial facility, there's an LVDH model to meet your requirements.
CLICK BELOW TO KNOW MORE...
PRINCIPLE
Oil is indirectly heated and fed into a vacuum chamber where it is dispersed into a thin film to vaporise water and dissolved gases at low temperature.
The air and gases that evolve are condensed and removed from oil. Ultimate water removal through re circulation is zero percent water content or 5O% below saturation level. Soluble gases and air are also removed to 50% of saturation level. Indirectly heating oil at low temperature ensures there is no burn off, no oxidation and no additive depletion.
Cracked low molecular weight oil, which is a by-product of the oil oxidation process, which accumulates in the hydraulic or lubrication fluid, accumulates in Oil.